| Table of Contents |
|---|
...
JBL CSA 2120Z Power Amplifier
...
Power button- Illuminated ring around the power switch.
Green - indicates that the unit is connected to the AC mains and is in standby or sleep mode.
Blue - indicates that the unit is on and in normal operating mode.
...
Master 1 - controls the volume output of the speaker to the right of the projector screen
Master 2 - controls the volume output of the speaker to the left of the projector screen
DVD / VHS
!!! PLEASE READ !!!
!!!!! REGION CHANGING INSTRUCTIONS !!!!!
Region Free Blu-ray Region change instructions
Samsung BD-JF100, BD-J5700, BD-J5900, & BD-H5900 LG BP-550, BP-350, BP-175 & BP-250 Panasonic BD-91, BD-270, BD-360 & BD-460
Standard DVD Regions 0-8 (region free-code free)
Are set to automatic, just insert disc and press play
Blu-ray Regions are changed manually with remote
To change regions-
Turn player ON AND OPEN THE TRAY
Once the tray is completely open you may enter your disc if you’d like before going on to the next step
To select the blu-ray region press a button on the remote
ZONE A: Press 1 BUTTON ON THE REMOTE CONTROL
ZONE B: Press 2 BUTTON ON THE REMOTE CONTROL
ZONE C: Press 3 BUTTON ON THE REMOTE CONTROL
The tray should automatically close and the player will switch regions.
Troubleshooting:
If your disc does not play do the following
Open the tray again and leave the disc in the tray. Once fully open press the number button above corresponding to your region.
Firmware updates: Firmware updates can be done via the internet. To update players firmware; go to the home menu, then setup menu, and then go to software update. You must have the player connected to the internet. Click on update via internet and if there is a new firmware the player will automatically update. DO NOT TURN THE PLAYER OFF while it is updating.
Document Camera
Projector
...