| Anchor | ||||
|---|---|---|---|---|
|
...
Input - 8: DVD/Blu-Ray/Multi-region Player
...
Room Audio
Note: Make all audio adjustments on the main PC.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
...
Power button- Illuminated ring around the power switch.
Green - indicates that the unit is connected to the AC mains and is in standby or sleep mode.
Blue - indicates that the unit is on and in normal operating mode.
...
DVD / Blu-Ray / Multi-Region
...
!!! PLEASE READ !!!
...
The power button is outlined in red.
The disc eject button is outlined in green.
The disc tray is outlined in gold.
Region Free Blu-ray Region change instructions
...
Samsung BD-JF100, BD-J5700, BD-J5900, & BD-H5900 LG BP-550, BP-350, BP-175 & BP-250 Panasonic BD-91, BD-270, BD-360 & BD-460
:
Standard DVD Regions 0-8 (region free-code
...
Free)
...
These are set to automatic
...
- just insert the disc and press
...
play.
...
To change regions
Blu-ray Regions are changed manually with remote
...
.
Turn player
...
on and open the tray.
Once the tray is completely open
...
and not moving press a button on the remote to select regions.
...
Zone A:Press
...
ZONE B: Press 2 BUTTON ON THE REMOTE CONTROL
ZONE C: Press 3 BUTTON ON THE REMOTE CONTROL
The tray should automatically close and the player will switch regions.
Troubleshooting:
...
the YELLOW button on the remote control.
Zone B:Press the BLUE button on the remote control.
Zone C:Press the RED button on the remote control.
You can now put your disc in the tray and then close the tray.
Troubleshooting:
If your Disc does not play do the following:
Open the tray again and leave the disc in the tray. Once fully open press the
...
color button
...
to
...
select the region. Then close the tray.
Firmware updates
...
- Firmware updates can be done via the internet.To update players firmware; go to the home menu, then setup menu, and then go to
...
Software update. You must have the player connected to the internet. Click on
...
Update Via Internet and if there is a new firmware the player will automatically update. DO
...
not turn the player off while it is updating.
Projector
...
Projector Screen
...