| Anchor | ||
|---|---|---|
|
...
The presence of power is indicated by the light highlighted outlined ingreen.
The power switch is outlined in red
...
.
Do not turn off.
...
Main PC
...
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
...
#7 - Document Camera
#8 - Guest HDMI
Amplifier
...
Press on menu button (highlighted in red) to access the main menu.
Press on soft key 1 (highlighted in green) to access the level menu
Press again on soft key 1 (highlighted in green) to access the input menu
Use the rotary knob from the LEVEL menu to highlight, then press to select.
Spin the rotary knob (highlighted in gold) to highlight the desired input and press to select.
...
Input 1: DVD/VHS Player
Input 2: Multi-region Player
Input 3: Not in use (leave off)
Input 4: Not in use (leave off)
Input 5: Main PC
Input 6: Guest VGA
Input 7: Guest HDMI
...
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Stereo Mixer
The light highlighted outlined in red white indicates the presence of power.
To mute the stereo audio, press the button highlighted in green.
The port highlighted in violet can be used to plugin a 3.5mm jack device.
The knob highlighted in gold controls the stereo volumePress the button outlined in gold to mute an individual channel.
The knob outlined in red controls the stereo output.
The knob highlighted outlined in white green controls the volume of the device plugged into the 3.5mm jack.
...
mono output.
The lights outlined in purple show the audio level coming into the Ashley LX-308B Stereo Mixer.
...
Input 1: DVD/VHS Player
Input 2: Multi-region Player
...
Input 8: Not in use (leave off)
Troubleshooting Audio
On the device, is the volume turned up?
...
On the device, is the volume muted?
...
Is the input on the Ashly LX-308B Stereo Mixer muted? (outlined in gold)
...
Do you have levels coming through the Ashly LX-308B Stereo Mixer? (outlined in purple)
...
Is the volume Level turned up for either the stereo, or mono output on the Ashly LX-308B Stereo Mixer?
...
a. Is the Pan set to the middle so it projects audio from both speakers? (outlined in green below)
i. Described in image below. (outlined in gold)
Is the volume Level turned up on the correct input? (outlined in red below)
Described in image below. (outlined in gold)
Is the Pan set to the middle so it projects audio from both speakers? (outlined in green below)
Described in image below. (outlined in gold)
...
Amplifier
Note: Changes to audio levels should be made on the device being used or the Ashly LX-308B Stereo Mixer.
...
DVD/VHS
...
Press the power button (highlighted in red) to turn on the Samsung DVD/VHS player.
...
Insert DVD/VHS and hit play.
...
Bluetooth Receiver
Before proceeding to next steps,
...
make sure that the Denon Bluetooth receiver is turned on.
The light
...
above the power switch (
...
outlined in red) indicates power.
...
To pair:
Briefly press DN-300BR’s Pair button (outlined in gold). The Status Light will start flashing quickly.
On your Bluetooth device, enter its Bluetooth settings menu, and select DN-300BR. When DN300BR successfully pairs to a Bluetooth device, the Status Light will stop flashing and remain lit.
Note: Some older Bluetooth devices may require you to enter a PIN. If this is the case, enter 0000 as the PIN.
...
Enter your Bluetooth device’s Bluetooth settings menu, and disconnect from DN-300BR.
Press and hold DN-300BR’s Pair button for 3 seconds, and then release it. DN-300BR will unpair from your Bluetooth device, remove it from the memory of the Bluetooth module, and be available to pair to another device.
Bluetooth Volume
Set the volume on your device.
...
Raise/lower the volume using the knob (highlighted in green).
The status of bluetooth connection is indicated by lights highlighted in gold.
Document Camera
...
Projector
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
...