| Anchor | ||||
|---|---|---|---|---|
|
...
Familiarize yourself with the equipment in the room
...
Insert a new picture of the room
Power Supply
Leave it turned on.
The light (outlined in red) indicates that the presence of power supply is turned on.
...
Main PC
...
When the PC is on, the light illuminates WHITE, as shown above.
If you find the PC turned off, press the power button once.
The power button is on the back right hand side if you are reaching from the front, as shown below.
...
#8 - Document Camera
Room Audio
Note: Make all audio adjustments on the main PC first.
...
Click on the icon (outlined in red)
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an cross on it (outlined in red).
To unmute the computer, click the speaker icon.
Use the TV remote to turn the volume up or down as needed.
...
All volume changes should be made on the “Master” volume control knob shown above.
...
Power switch: This switch can power on or power off the amplifier. The amplifier is necessary to power the speakers. If the amplifier is turned off, you will have no audio to the room speakers, which in this room, are hanging from the ceiling.
Greencircle: Indicates that the amplifier has power when the light is illuminated green.
Note: The knobs highlight in red on the right side of the amplifier are to be set directly in the middle, pointing straight up. If you set them to the far right, you will distort the audio. If you set them to the left, you will have no audio.
Inputs
Channel 1 & Channel 2 control the stereo audio of the room
DVD / VHS player
...
Press the power button (highlighted in red) to turn on the Sony DVD/VHS player.
...
To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.
Insert a new image