| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
...
Familiarize yourself with the the room
...
Main PC
...
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
...
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
...
Input - 8: DVD/Blu-Ray/Multi-region Player
...
Room Audio
Note: Make all audio adjustments on the main PC.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
...
Power button- Illuminated ring around the power switch.
Green - indicates that the unit is connected to the AC mains and is in standby or sleep mode.
Blue - indicates that the unit is on and in normal operating mode.
...
Master 1 - controls the volume output of the speaker to the right of the projector screen
Master 2 - controls the volume output of the speaker to the left of the projector screen
DVD / Blu-Ray / Multi-Region
...
The power button is outlined in red.
...
Region Free Blu-ray Region change instructions:
Standard DVD Regions 0-8 (region free-code Free)
These are set to automatic - just insert the disc and press play.
...
To change regions
Blu-ray Regions are changed manually with remote.
Turn player on and open the tray.
Once the tray is completely open and not moving press a button on the remote to select regions.
Zone A:Press the YELLOW button on the remote control.
Zone B:Press the BLUE button on the remote control.
Zone C:Press the RED button on the remote control.
You can now put your disc in the tray and then close the tray.
...
If your Disc does not play do the following:
Open the tray again and leave the disc in the tray. Once fully open press the color button to select the region. Then close the tray.
Firmware updates - Firmware updates can be done via the internet.To update players firmware; go to the home menu, then setup menu, and then go to Software update. You must have the player connected to the internet. Click on Update Via Internet and if there is a new firmware the player will automatically update. DO not turn the player off while it is updating.
Projector
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
...
Projector Screen
The projector screen is manual and there is a string at the bottom center.
...