Wireless Configuration – Windows 7,8,10 and FortiNAC Registration
| Info |
|---|
Important: If you have attempted to connect to Wi-Fi by way of the Knox Guest Access network, these steps will not work. Make sure to forget the Knox Guest Access network prior to connecting to Knox-Wireless |
...
Make sure you are on the Windows Desktop of your computer. Machines running Windows 8 tend to default to the Start screen. To make sure, push the Windows button and “D” simultaneously and you will be taken to the Windows desktop.
In the lower right corner of the desktop, right click on the Wifi symbol.
...
3. Select Knox-Wireless and click connect
...
6. After you see that the connection is connected you are ready to move to the FortiNAC registration setup.
...
FortiNAC Registration
Initial Installation Procedure
...
Read over the acceptable use policy by clicking the link
Click on Agree
...
3. The Welcome page will open. Click on option one: Students, Faculty, and Constituents who have a permanent Knox Account.
...
4. The Download screen will appear:
...
7. When the scan completes your computer will most likely fail one or both of the requirements to complete the registration process. Your computer will be placed on the remediation network.
...
12. FortiNAC should reconfigure. Please be patient.
...
Having problems viewing this page? Click the pop-out 
button in your browser.
...
If you have any questions or need assistance, contact the Help Desk at 309-341-7700 or email helpdesker@knox.edu