| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
...
#2 Guest HDMI
#3 Document camera
#4 Not in useDVD player
#5 Guest VGA
#6 Not in use
#7 DVD/VHS playerNot in use
#8 Not in use
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
...
The LED light (outlined in green) illuminates green when the MPA 401 unit is receiving power and active. It lights amber when the unit is on standby.
Potentiometers (outlined in red) are used to optimize level, bass, and treble settings.
Document Camera
...
DVD/VHS
...
...
The power button is outlined in red.
The disc eject button is outlined in green.
The disc tray is outlined in gold.
Region Free Blu-ray Region change instructions:
Standard DVD Regions 0-8 (region free-code Free)
These are set to automatic - just insert the disc and press play.
...
To change regions
Blu-ray Regions are changed manually with remote.
Turn player on and open the tray.
Once the tray is completely open and not moving press a button on the remote to select regions.
Zone A:Press the YELLOW button on the remote control.
Zone B:Press the BLUE button on the remote control.
Zone C:Press the RED button on the remote control.
You can now put your disc in the tray and then close the tray.
Troubleshooting:
If your Disc does not play do the following:
Open the tray again and leave the disc in the tray. Once fully open press the color button to select the region. Then close the tray.
Firmware updates - Firmware updates can be done via the internet.To update players firmware; go to the home menu, then setup menu, and then go to Software update. You must have the player connected to the internet. Click on Update Via Internet and if there is a new firmware the player will automatically update. DO not turn the player off while it is updating.
Projector
Point the remote at the front of the projector.
...