...

A toolbar will pop up at the top-center of your laptop screen. Click on it to view your wireless connection settings. Or directly click on ‘Disconnect’ to end your wireless connection display.

...

Power Supply

Note: Shut it off when not in use.

...

CD Player

...

1. Press the power button (highlighted to turn on the player. (outlined in red on left side).

2. Press source button until you see CD on the screen. (outlined in teal)

3. Press the eject button (highlighted to ensure there isn’t a disc in the player. (outlined in gold).

4. Insert the DVD CD into the tray and close it using the eject buttonplayer after confirming there isn’t a disc in the tray.

5. Hit play. (highlighted outlined in green)

Bluetooth Connection

UN-OUTLINE BUTTONS NOT NEEDED HERE

OUTLINE BUTTONS NEEDED HERE

...

1. Press the power button to turn on the player. (outlined in red)

2. Press source button (highlighted in red on left side).

3. PRESS SOURCE BUTTON UNTIL YOU GET TO ??? HIGHLIGHTED ON IMAGE TOO

4. PRESS PAIRING BUTTON HERE UNTIL WHAT SCREEN APPEARS?

5. DO WHAT NEXT?teal) until you get to Bluetooth

   1. The TASCM CD screen would look like this when you reach Bluetooth.

...

3. Press pairing / back button until you see 'pairing' on the screen. (outlined in gold)

...

4. On your device, make sure Bluetooth is turned on.

   1. ‘Scan’ for: CD-400U.

   2. Confirm Pairing to CD-400U.

5. You are now paired with the Tascam CD-400U device.

   1. The Tascam screen will look like this when you are paired.

...

Room Audio

Note: Make all audio adjustments on the main PC, laptop, or Bluetooth device first.

...

• Click the speaker icon (outlined in red).

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

...

• The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

  • To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Bose

...

ControlSpace Control Center - Audio controls here

Note: The only controls for this are outlined in red and listed below.

Note: All audio adjustments are made here after making them on the device.

• Turn the knob left/right for the appropriate device connection.

• Press the knob in to mute the channel. Press it again to unmute the channel.

Knob 1: Guest Audio (Hanging from the AV cabinet)

...

Knob 3: TASCAM CD-400U

Knob 4: Bluetooth

OUTLINE THE 4 KNOBS IN RED TOGETHER FOR ME SO I CAN INDICATE THESE ARE THE ONLY 4 KNOBS THAT DO SOMETHING.

...

Amplifier

Note: Do not make any changes on the amplifier.

...

Adjusting the Bass: Bose PM4250

1. Press the Menu button.

   Image Added

2. Press the Level button.

   Image Added

3. Use the scroll wheel and turn it until you get to “Output Attenuate”.

   Image Added

4. Push the scroll wheel as a button to select Output Attenuate.

   Image Added

5. Scroll until you see Channel 3 & 4 listed.

   Image Added

6. Press the scroll wheel like a button to select Channel 3 & 4. They are locked together. Turn the wheel to adjust the bass to the desired level.

...

Sound Processor

Note: No controls available.

...

Bose Wall Speakers

There are 4 Bose speakers on the walls around the room. Here are 2 (the other two are across the room):

...

CROP THE ABOVE IMAGE TO BE MORE CENTERED

...

Bose Subwoofer Speakers

Note: No controls available.

These The 2 Bose Subwoofers provide the Bass to the audio in CFA 156. These should be connected to the wall plates nearby.

...