| Info |
|---|
Note: SMC A201 and A202 are typically treated as one large room. There is a heavy divider that may be lowered down to divide the rooms. Contact the Registrar’s office or Kelly Fisk for assistance. |
...
Identify the correct input number for your device connection and select it by pressing the appropriate button
The active selection is backlit with a red light
...
Room Audio
Note: Make all audio adjustments on the main PC.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
No controls available.
...
Kaptivo Digital Whiteboard
...
To
...
To begin, go to kaptivo.com.
In the top right hand corner, click Connect to Kaptivo.
Enter the Kaptivo ID and then view the board.
For SMC A201, the Kaptivo ID is: DNRMBG
...
If the Kaptivo was in use:
To begin, go to kaptivo.com. In the top right hand corner, click Connect to Kaptivo.
Click “View Board” under the label DNRMBG/Kaptivo-A203.
...
connect
Type 10.72.5.125 (this room’s Kaptivo IP address) into a web browser search bar.
Press the button to connect the Kaptivo to the computer.
Enter your name when prompted.
Use the whiteboard.
Save your whiteboards on the computer.
Send the whiteboards to yourself for upload to your course/students.
Document Camera
...
TV: A201 Main PC
...
The input on the project remote should be set to HDMI1 to display the same content as the computer.
To change this setting on the projector:
Turn the projector on.
Once the projector image is displaying on the screen, click the Source Search button (outlined in green). The projector will search for available feeds.
...