| Anchor | ||
|---|---|---|
|
| Table of Contents |
|---|
...
Familiarize yourself with the
...
AV equipment
...
Power Supply
Leave it turned on.
The green light (outlined below) indicates that the power supply is turned on.
...
...
Video Switcher
...
Here you can switch the inputs for the projector
...
Mac Mini
...
When the Mac Mini is on, the light illuminates WHITE, as shown above.
If you find the Mac Mini turned off, press the power button once.
The power button is on the back right hand side if you are reaching from the front, as shown below.
...
Do not shut down the Mac Mini.
USB Plug-in
On the left side of the lectern when facing the monitor screen, you will see an Anker USB hub. Utilize this for any slide advancers, USB sticks, or other equipment you need to plug in to the computer.
...
Troubleshooting the computer
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
Identify the correct input number for your device connection and select it by pressing the appropriate button.
The active selection is backlit with a red light.
...
Input - 1: Main PC
Input - 2: Not in use
...
Input - 8: Not in use
Room Audio
Note: Make all audio adjustments on the main PC first.
Each Mac has different icons to find volume button. Here is an example.
Click on the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to cross on it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Use the TV remote to turn the volume up or down as needed.
Amplifier
...
Red circle is the power button, it has a light which indicates when the power is on / off
Green circle is the master volume, audio adjustments for any type of platform can be made there
USB Hub
The USB Hub can be used If there is a need to plugin a USB device into the Main PC.
...
Sony DVD / Blu-Ray / Multi-Region
...
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
...
Projector Screen
...
To bring raise or lower the projector screen down, press locate the switch down.
To put the projector screen up, press the switch up.
, as shown below.
...