Familiarize yourself with the equipment in the room
.jpg?version=1&modificationDate=1690389957580&cacheVersion=1&api=v2)
Power Supply
Main PC
When the PC is on, the light illuminates WHITE, as shown above.
If you find the PC turned off, press the power button once.
The power button is on the back right hand side if you are reaching from the front, as shown below.
Do not shut down the main PC.
Video Switcher
The video switcher helps select between multiple incoming video sources.
For projection make sure the power is turned on for the switcher. The green switch located on the left should have the “I” pressed in for it to be turned on. If the “O” is pressed in, the video switcher is turned off.
Identify the correct input number for your device connection and select it by pressing the appropriate button.
The active selection is backlit with a red light.
Make the correct selection:
#1 - DVD/VHS
#2 - Not in use
#3 - Not in use
#4 - Not in use
#5 - Not in use
#6 - Guest VGA
#7 - Main PC
#8 - Document Camera
Room Audio
Note: Make all audio adjustments on the main PC first.
Each Mac has different icons to find volume button. Here is an example.
Click on the icon (outlined in red)
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
The computer volume is muted if you see the speaker icon with an cross on it (outlined in red).
To unmute the computer, click the speaker icon.
Use the TV remote to turn the volume up or down as needed.
Amplifier
All volume changes should be made on the “Master” volume control knob shown above.
Power switch: This switch can power on or power off the amplifier. The amplifier is necessary to power the speakers. If the amplifier is turned off, you will have no audio to the room speakers, which in this room, are hanging from the ceiling.
Green circle: Indicates that the amplifier has power when the light is illuminated green.
Note: The knobs highlight in red on the right side of the amplifier are to be set directly in the middle, pointing straight up. If you set them to the far right, you will distort the audio. If you set them to the left, you will have no audio.