Familiarize yourself with the AV Equipment
TV
To turn the TV on press the power button (outlined in red).
To bring up the input menu, press the “source” button (outlined in green).
To switch inputs, use the arrow up and down buttons (outlined in gold).
If the remote is unresponsive, replace the batteries with fresh ones.
To change inputs; press the ‘Input’ button (outlined in green). An input source display will pop-up on the top right corner of the TV where you can select the input using the up or down arrows.
SHARP LC-70UQ17U inputs listed:
Input 2 - Main PC
Input 4 - Guest HDMI
The rest of inputs are not in use (as seen in the picture above as not available)
Power Supply
Leave it turned on.
The green light (outlined below) indicates that the power supply is turned on.
Main PC
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
Jiggle the mouse or press the keyboard to wake the computer.
Sign in to the computer with your username and password.
Do not shut down the main PC.
When finished, log off of the main PC.
Troubleshooting the computer
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
Note: Changes to audio levels should be made on the device being used or the Ashly LX-308B Stereo Mixer.
DVD Player
Press the power button (highlighted in red on left side).
Press eject button (highlighted in gold).
Insert the DVD into the tray and close it using the eject button.
Hit play (highlighted in green).
Sound Processor
Room Audio Controller
Knob 1: Guest Audio
Knob 2: TV
Knob 3: TASCAM CD-400U
Knob 4: Bluetooth
Other Technology in the Room
WIFI Adapter
The region outlined in red is already plugged into the computer. Make sure it is plugged into the computer for optimum network connection.
Bose Speaker
All required cables are already connected on the rear side of the speaker. Please do not touch the rear side cables.
Bose Wall Speakers
These speakers can be controlled using the amplifier. The audio cables have been routed from amplifier to the wall speakers.
Gallien-Krueger Speaker
Fender Fighter 12
