Familiarize yourself with the AV equipment
Power Supply
Do not turn off the power supply.
Main PC
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
Do not shut down the main PC.
When finished, log off of the main PC.
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
Identify the correct input number for your device connection and select it by pressing the appropriate button.
The active selection is backlit with a red light.
Make the correct selection:
#1 - Main PC
#2 - Not in use
#3 - Document Camera
#4 - Guest HDMI
#5 - Not in use
#6 - Not in use
#7 - Not in use
#8 - Not in use
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
No controls here. Adjust the volume on the computer or Sony player.
Document Camera
Projector
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
Projector Screen
The projector screen is manual and there is a string at the bottom center.
To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.
To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.
