Familiarize yourself with the the room
Main PC
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
Do not shut down the main PC.
When finished, log off of the main PC.
Troubleshooting the computer
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
Input - 1:
Input - 2:
Input - 3:
Input - 4:
Input - 5: Main PC
Input - 6: Guest VGA
Input - 7: Guest HDMI
Input - 8: DVD/Blu-Ray/Multi-region Player
Amplifier
Power button - Illuminated ring around the power switch.
Green - indicates that the unit is connected to the AC mains and is in standby or sleep mode.
Blue - indicates that the unit is on and in normal operating mode.
Master 1 and Master 2
Illuminated ring around the output volume control will light up green with signal presence while red indicates clipping, i.e. the signal has reached the threshold of audible distortion. For balanced listening, adjust the two knobs so they are at the same level
Master 1 - controls the volume output of the speaker to the right of the projector screen
Master 2 - controls the volume output of the speaker to the left of the projector screen
DVD / Blu-Ray / Multi-Region
.jpg?version=1&modificationDate=1689623120926&cacheVersion=1&api=v2&width=544&height=85)
!!! PLEASE READ !!!
!!!!! REGION CHANGING INSTRUCTIONS !!!!!
Region Free Blu-ray Region change instructions
Samsung BD-JF100, BD-J5700, BD-J5900, & BD-H5900 LG BP-550, BP-350, BP-175 & BP-250 Panasonic BD-91, BD-270, BD-360 & BD-460
Standard DVD Regions 0-8 (region free-code free)
Are set to automatic, just insert disc and press play
Blu-ray Regions are changed manually with remote
To change regions-
Turn player ON AND OPEN THE TRAY
Once the tray is completely open you may enter your disc if you’d like before going on to the next step
To select the blu-ray region press a button on the remote
ZONE A: Press 1 BUTTON ON THE REMOTE CONTROL
ZONE B: Press 2 BUTTON ON THE REMOTE CONTROL
ZONE C: Press 3 BUTTON ON THE REMOTE CONTROL
The tray should automatically close and the player will switch regions.
Troubleshooting:
If your disc does not play do the following
Open the tray again and leave the disc in the tray. Once fully open press the number button above corresponding to your region.
Firmware updates: Firmware updates can be done via the internet. To update players firmware; go to the home menu, then setup menu, and then go to software update. You must have the player connected to the internet. Click on update via internet and if there is a new firmware the player will automatically update. DO NOT TURN THE PLAYER OFF while it is updating.
Projector
Projector Screen
The projector screen is manual and there is a string at the bottom center.
To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.
To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.
