| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
...
#8 - Not in use
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
Red highlighted button: This button can power on or power off the amplifier. Turn it on for any audio needs.
Greenhighlighted button: It is the master volume knob and can control all audio output from all sources.
...
Input 8: Not in use (leave off)
VHS Player
...
Turn on the VHS player by pressing the power button(highlighted in red).Insert the VHS
Press the eject button (highlighted in green).
Close the tray using the eject button.
Hit play (highlighted in gold).
Sony DVD / Blu-Ray / Multi-Region
...
Document Camera
...
Projectors
To turn on: Press the power button once. Wait for the projection to load. Might take a minute.
To turn off: Press the power button, watch for the text that will show up in the projection. Press the power button again to fully turn it off.
Freeze: This button will “freeze” the projection. The display will stay the same regardless of what you do in the computer. Press the button again to “unfreeze” and the projection will go on as usual.
...
Note: Do not point at both projectors at the same time.
Front Projector
Stand near the Front projector and follow the
...
Back Projector
The display from this projector is wider.below instructions
Point the remote at the front of the projector.
Turning on the projector: Press “On” once (outlined in red).
Turning off the projector: Press “Off” twice (outlined in green).
...
Back Projector
Stand back, closer to the back projector than the front projector. Make sure to point the controller to the front part of the projector (where the lens is) and not the side. DO NOT POINT AT BOTH PROJECTORS AT THE SAME TIME. Turn on.
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
...