| Info |
|---|
Note: SMC A201 and A202 are typically treated as one large room. There is a heavy divider that may be lowered down to divide the rooms. |
| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
...
Familiarize yourself with the AV Equipment
...
Power Supply
Leave turned on all the time.
...
Main PC
...
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
...
When finished, log off of the main PC.
Troubleshooting the computer
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
...
Input - 7: Not in use
Input - 8: Main PC
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
No controls available.
...
Blu-Ray Player
...
Document Camera
...
TV: A202 Main PC
To turn the TV on, press the power button (outlined in red).
...
You should now see the SMC A202 Main PC displayed on the TV.
...
Note: You can also choose to show the SMC A201 PC on this TV. For this to work, the SMC A201 PC needs to be turned on and logged in. Simply choose “SMC A201 PC” as shown below.
...
TV: Wireless connection for laptop
To turn the TV on, press the power button (outlined in red).
...
Your choices are listed below:
...
Disconnecting the Wireless Display
A toolbar will pop up at the top-center of your laptop screen. Click on it to view your wireless connection settings. Or directly click on ‘Disconnect’ to end your wireless connection display.
...
Projector
...
Projector Use
The input on the project remote should be set to HDMI1 to display the same content as the computer.
...
Freeze: This button will “freeze” the projection. The display will stay the same regardless of what you do in the computer. Press the button again to “unfreeze” and the projection will go on as usual.
Projector Screen
The projector screen is manual and there is a string at the bottom center.
...