| Anchor | ||||
|---|---|---|---|---|
|
...
Log in with your account.
Log in with the generic account.
Username: .\Kresge
Password: Knox1837
Room Audio
Note: Make all audio adjustments on the main PC.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
Do not use any buttons other than power button.
The power button is outlined in red.
...
Mixer
...
The light outlined in red indicates the presence of power.
If the mixer isn’t powered on, proceed to “Turn on Mixer“ section.
The fader outlined in green is the Master volume. This must be turned up to produce any sound.
The section outlined in gold are XLR microphone inputs.
...
After selecting microphones from the bin, adjust the faders on the mixer accordingly. Ensure that the main key is leveled up.
Note: Do not fade any key suddenly. Make sure to increase keys gradually.
Turn on Mixer
...
The switch outlined in red can be used to turn on the Mixer.
...
Turn on the DVD / VCR Player using the power button(highlighted in red).
Choose DVD or VCR from the section highlighted in gold.
Use Eject button (highlighted in green) to open the tray.
Insert DVD/VHS and hit play.
...
Disc Charger
...
Power Amplifier
...
...
To raise the volume in the booths, turn the Channel 1 or 2 knob to the right.
To lower the volume in the booths, turn the Channel 1 or 2 knob to the left.
Channel 1: AV Booth Speaker???
Channel 2: Projector Booth VolumeSpeaker???
Projector
...
Projector Screen
...
Note: The screen does not need to fully extend. Only extend it as far as needed by having the projector turned on first.
To lower the projector screen
...
, press the switch down.
To raise the projector screen
...
, press the switch up.
To stop the screen
...
, let go of the switch.
The projector screen switch is located along the back wall of the stage, to the right.
...