| Anchor | ||||
|---|---|---|---|---|
|
...
Familiarize yourself with the equipment in the room
...
Power Supply
Leave turned on all the time.
...
Main PC
...
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
...
Log in with your account.
Log in with the generic account.
Username: .\Kresge
Password: Knox1837
Room Audio
Amplifier
This has to be turned on to produce sound in the theater.
Note: Do not use any buttons other than power button.
The power button is outlined in red.
...
Computer Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
Do not use any buttons other than power button.
The power button is outlined in red.
...
Mixer
...
Mixer
...
Mixer Guide
Note: Increase faders gradually to avoid any detrimental issues to the system or the audience.
Do not raise or lower the faders suddenly.
The light outlined in red indicates the presence of power.
If the mixer isn’t powered on
...
, locate the power switch. (indicated by the red arrow)
There is a better illustration of the power switch with it outlined in red.
Kresge has 5 wireless microphones installed. The faders for these are outlined in gold to control them.
To raise the volume of a microphone, raise the fader associated with it to Unity, or 0.
The 4 faders outlined in purple are the Sub-groups.
These must be turned up before the Master volume to Unity, or 0.
The fader outlined in green is the Master volume. This must be turned up to produce any sound
...
The section outlined in gold are XLR microphone inputs.
...
.
Start raising the master fader slowly, until you reach a comfortable volume.
Note: You may not reach Unity, or 0, before you reach a good level for the theater.
INSERT WHICH CHANNEL THE COMPUTER AUDIO IS HERE
INSERT WHICH CHANNEL THE DVD PLAYER IS HERE
INSERT WHICH CHANNEL THE CD PLAYER IS HERE
Microphone not working
Followed instructions but there is still no audio from microphone?
Is the microphone turned on?
Press the power button on the microphone until a green light appears.
No green light appears on the microphone?
Batteries in the microphone are dead. Replace the batteries.
Unmute the channel for the microphone. (outlined in teal)
Feedback
Turn down the microphone causing the feedback immediately.
Adjust the Gain Knob by turning it to the left. (outlined in light blue)
Raise the volume on the fader for that microphone until you reach the desired audio level.
“Popping P’s”
Adjust the Gain Knob by turning it to the left until the P’s stop popping. (outlined in light blue)
Raise the volume on the fader for that microphone until you reach the desired audio level.
Wireless microphones
After selecting microphones from the bin, adjust the faders on the mixer accordingly. Ensure that the main key is leveled up.
Note: Do not fade any key suddenly. Make sure to increase keys gradually.
Turn on Mixer
...
The switch outlined in red can be used to turn on the Mixer.
according to which microphone you selected.
...
Booth Audio
...
To raise the volume in the booths, turn the Channel 1 or 2 knob to the right.
To lower the volume in the booths, turn the Channel 1 or 2 knob to the left.
Channel 1: AV Booth Speaker???
Channel 2: Projector Booth Speaker???
Video Switcher
The video switcher helps select between multiple incoming video sources.
Identify the correct input number for your device connection and select it by pressing the appropriate button
The active selection is backlit with a red light
...
#1 - Not in use ???
#2 - Not in use ???
#3 - Main PC
#4 - Not in use ???
#5 - Not in use ???
#6 - Not in use ???
#7 - Not in use ???
#8 - Not in use ???
Blu-Ray player
...
DVD / VCR Player
...
...
To turn on the DVD / VCR Player
...
, use the power button. (
...
outlined in red)
...
Choose DVD or VCR from the section
...
. (outlined in gold
...
)
Use the Eject button
...
to open the tray. (outlined in green)
Insert DVD/VHS and hit play.
...
Disc Charger
...
Power Amplifier
...
To raise the volume in the booths, turn the Channel 1 or 2 knob to the right.
To lower the volume in the booths, turn the Channel 1 or 2 knob to the left.
Channel 1: AV Booth Speaker???
Channel 2: Projector Booth Speaker???
Projector
...
CD Player - 5 Disc Changer
...
Projector
The projector is located in the center of the theater at the back inside the projector booth.
The projector booth door is across the hall from the AV door.
...
Projector Screen
Note: The screen does not need to fully extend. Only extend it as far as needed by having the projector turned on first.
...
The projector screen switch is located along the back wall of the stage, to the right.
...
INSERT IMAGE OF PROJECTOR SCREEN PROJECTING COMPUTER DESKTOP HERE