| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents |
|---|
...
Familiarize yourself with the AV Equipment
...
TV
...
To turn the TV on press the power button (outlined in red).
...
To change inputs; press the ‘Input’ button (outlined in green). An input source display will pop-up on the top right corner of the TV where you can select the input using the up or down arrows.
INSERT PICTURE OF INPUTS HERE CROPPED
SHARP LC-70UQ17U inputs listed:
Input 1 - Main PC
Input 2 - Guest HDMI
Screenshare
TV Screenshare
...
On TV, select Screen Sharing In inputs section.
...
On the computer,
Next steps on your laptop:
Open the start menu in the bottom left corner of your computer screen. Choose settings.
In the settings window choose 'System'.
On the displayed page, scroll to the bottom and find the image shown below:
Click on ‘Connect to a wireless display’.
...
After you’ve clicked on ‘Connect to a wireless display’, the screen shown below will appear:
Select ‘AQUOS' from the Wireless display menu.
...
You are now successfully connected, the screen from your laptop should now display on the TV as shown below:
...
Disconnecting the Wireless Display
A toolbar will pop up at the top-center of your laptop screen. Click on it to view your wireless connection settings. Or directly click on ‘Disconnect’ to end your wireless connection display.
...
Power Supply
Note: Shut it off when not in use.
...
Press the power button (highlighted in red on left side).
PRESS SOURCE BUTTON UNTIL YOU GET TO ??? HIGHLIGHTED ON IMAGE TOO
Press eject button (highlighted in gold).
Insert the DVD into the tray and close it using the eject button.
Hit play (highlighted in green)
Bluetooth Connection
UN-OUTLINE BUTTONS NOT NEEDED HERE
...
Press the power button (highlighted in red on left side).
PRESS SOURCE BUTTON UNTIL YOU GET TO ??? HIGHLIGHTED ON IMAGE TOO
PRESS PAIRING BUTTON HERE UNTIL WHAT SCREEN APPEARS?
DO WHAT NEXT?
Room Audio
Note: Make all audio adjustments on the main PC, laptop, or Bluetooth device first.
...
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Bose Controlspace Controller - Audio controls here
...
Knob 4: Bluetooth
Amplifier
Note: Do not make any changes on the amplifier.
...
Sound Processor
Note: No controls available.
...
Bose Wall Speakers
...
Bose Subwoofer Speakers
Note: No controls available.
These provide the Bass to the audio in CFA 156. These should be connected to the wall plates nearby.
...