CFA 156 - Nelson Dean Jay Rehearsal Room

Familiarize yourself with the AV Equipment

TV

To turn the TV on press the power button (outlined in red).

To bring up the input menu, press the “source” button (outlined in green).

To switch inputs, use the arrow up and down buttons (outlined in gold).

If the remote is unresponsive, replace the batteries with fresh ones.

To change inputs; press the ‘Input’ button (outlined in green). An input source display will pop-up on the top right corner of the TV where you can select the input using the up or down arrows.

INSERT PICTURE OF INPUTS HERE CROPPED

SHARP LC-70UQ17U inputs listed:

Input 1 - Main PC
Input 2 - Guest HDMI
Screenshare

TV Screenshare

On TV, select Screen Sharing In inputs section.

On the computer,

Next steps on your laptop:

Open the start menu in the bottom left corner of your computer screen. Choose settings.
In the settings window choose 'System'.
On the displayed page, scroll to the bottom and find the image shown below:
- Click on ‘Connect to a wireless display’.

After you’ve clicked on ‘Connect to a wireless display’, the screen shown below will appear:

Select ‘AQUOS' from the Wireless display menu.

You are now successfully connected, the screen from your laptop should now display on the TV as shown below:

Disconnecting the Wireless Display

A toolbar will pop up at the top-center of your laptop screen. Click on it to view your wireless connection settings. Or directly click on ‘Disconnect’ to end your wireless connection display.

Power Supply

Note: Shut it off when not in use.

The green light (outlined below) indicates that the power supply is turned on.

Main PC

When the PC is on, the power button light illuminates WHITE.
- If you find the PC turned off, press the power button once.
Jiggle the mouse or press the keyboard to wake the computer.
Sign in to the computer with your username and password.
When finished, log off of the main PC and shut down the computer.

Troubleshooting the computer

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

CD Player

Press the power button (highlighted in red on left side).
PRESS SOURCE BUTTON UNTIL YOU GET TO ??? HIGHLIGHTED ON IMAGE TOO
Press eject button (highlighted in gold).
Insert the DVD into the tray and close it using the eject button.
Hit play (highlighted in green)

Bluetooth Connection

UN-OUTLINE BUTTONS NOT NEEDED HERE

Press the power button (highlighted in red on left side).
PRESS SOURCE BUTTON UNTIL YOU GET TO ??? HIGHLIGHTED ON IMAGE TOO
PRESS PAIRING BUTTON HERE UNTIL WHAT SCREEN APPEARS?
DO WHAT NEXT?

Room Audio

Note: Make all audio adjustments on the main PC, laptop, or Bluetooth device first.

For the main PC:

Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
- To unmute the computer, click the speaker icon with the “x” that is outlined in green.