| Anchor | ||
|---|---|---|
|
...
The presence of power is indicated by the light outlined ingreen.
The power switch is outlined in red.
Do not turn off.
...
Main PC
...
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
...
#8 - Guest HDMI
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Stereo Mixer
The light outlined in white indicates the presence of power.
Press the button outlined in gold to mute an individual channel.
The knob outlined in red controls the stereo output.
The knob outlined in green controls the mono output.
The lights outlined in purple show the audio level coming into the Ashley LX-308B Stereo Mixer.
...
Input 1: DVD/VHS Player
Input 2: Multi-region PlayerDenon CD player
Input 3: HEOS wireless speakerDenon Bluetooth player (DN-300BR)
Input 4: Not in use (leave off)
Input 5: Main PC
Input 6: Guest VGAAudio (3.5mm cable)
Input 7: Guest HDMINot in use (leave off)
Input 8: Not in use (leave off)
...
Is the volume Level turned up on the correct input? (outlined in red below)
Described in image below. (outlined in gold)
Is the Pan set to the middle so it projects audio from both speakers? (outlined in green below)
Described in image below. (outlined in gold)
...
Amplifier
Note: Changes to audio levels should be made on the device being used or the Ashly LX-308B Stereo Mixer.
...
Before proceeding to next steps, make sure that the Denon Bluetooth receiver is turned on.
The light above the power switch (outlined in red) indicates power.
...
To pair:
Briefly press DN-300BR’s Pair button (outlined in gold). The Status Light will start flashing quickly.
On your Bluetooth device, enter its Bluetooth settings menu, and select DN-300BR. When DN300BR successfully pairs to a Bluetooth device, the Status Light will stop flashing and remain lit.
Note: Some older Bluetooth devices may require you to enter a PIN. If this is the case, enter 0000 as the PIN.
...
Set the volume on your device.
Raise/lower the volume using the knob (highlighted in green).
Document Camera
...
Projector
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
...