| Anchor | ||
|---|---|---|
|
| Table of Contents |
|---|
...
Familiarize yourself with the equipment in the room
...
Power Supply
The presence of power is indicated by the light outlined ingreen.
The power switch is outlined in red.
Do not turn off.
...
Main PC
...
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
...
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
...
#7 - Document Camera
#8 - Guest HDMI
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
...
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Stereo Mixer
The light outlined in white indicates the presence of power.
Press the button outlined in gold to mute an individual channel.
The knob outlined in red controls the stereo output.
The knob outlined in green controls the mono output.
The lights outlined in purple show the audio level coming into the Ashley LX-308B Stereo Mixer.
...
Input 1: DVD/VHS Player
Input 2: Multi-region PlayerDenon CD player
Input 3: HEOS wireless speakerDenon Bluetooth player (DN-300BR)
Input 4: Not in use (leave off)
Input 5: Main PC
Input 6: Guest VGAAudio (3.5mm cable)
Input 7: Guest HDMINot in use (leave off)
Input 8: Not in use (leave off)
Troubleshooting Audio
On the device, is the volume turned up?
...
Is the volume Level turned up on the correct input? (outlined in red below)
Described in image below. (outlined in gold)
Is the Pan set to the middle so it projects audio from both speakers? (outlined in green below)
Described in image below. (outlined in gold)
...
Amplifier
Note: Changes to audio levels should be made on the device being used or the Ashly LX-308B Stereo Mixer.
...
DVD/VHS
...
Press the power button (highlighted in red) to turn on the Samsung DVD/VHS player.
...
Insert DVD/VHS and hit play.
...
Bluetooth Receiver
Before proceeding to next steps, make sure that the Denon Bluetooth receiver is turned on.
The light above the power switch (outlined in red) indicates power.
...
To pair:
Briefly press DN-300BR’s Pair button (outlined in gold). The Status Light will start flashing quickly.
On your Bluetooth device, enter its Bluetooth settings menu, and select DN-300BR. When DN300BR successfully pairs to a Bluetooth device, the Status Light will stop flashing and remain lit.
Note: Some older Bluetooth devices may require you to enter a PIN. If this is the case, enter 0000 as the PIN.
...
Enter your Bluetooth device’s Bluetooth settings menu, and disconnect from DN-300BR.
Press and hold DN-300BR’s Pair button for 3 seconds, and then release it. DN-300BR will unpair from your Bluetooth device, remove it from the memory of the Bluetooth module, and be available to pair to another device.
Bluetooth Volume
Set the volume on your device.
Raise/lower the volume using the knob (highlighted in green).
Document Camera
...
Projector
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
...
Projector Screen
The projector screen is manual and there is a string at the bottom center.
...