The Samson Portable Speaker has two audio connections; a Wireless Mic and a bluetooth connect for devices such as PC/ Phones to play audio.
The Kit comes with:
Speaker
Wireless Mic
Speaker Charger/Power Supply
Receiver
3.55 mm AUX Cable
| 2. If the speaker doesn’t light up, it probably needs charging. Connect the Power Supply to the power port on the back of the Speaker. |
---|---|
For Wireless Microphone Connection: | For Bluetooth Audio Connection: |
1. To connect the Wireless microphone plug in the receiver to the port labeled 3 on the back of the speaker. |
|
2. Hold the “pair' button on the receiver until it lights up. Make sure to turn up the volume nob next to the port. | 2. On your device, turn on Bluetooth and go to available devices (or something similar). The speaker should appear as “Samson XP 106”. The blue light will flash faster briefly and then stay on, indicating it has paired. You should now be able to play audio from your device out of the speaker. |
3. Turn Microphone by pressing the power button until it lights up. The mic should connect to the speaker. | 3. The volume of the Bluetooth device can be adjusted under Input #4 |
Optional: If you need another microphone
If you need another microphone in addition to the one included with the system, you can also check out a wireless microphone kit and use it with the Samson speaker. It comes with;
Receiver
Microphone
Power Cable
XLR Cable
|
2. Use the included XLR cable (the only other cable) to connect the back of the wireless receiver to Input #1 on the back of the Samson speaker. The cable should be rotated to get the small tab on the top before inserting |
3. You can now turn on the microphone and receiver
|
4. You may need to turn up the volume knob on Input #1 if you can’t hear the mic |