Familiarize yourself with the AV Equipment
Power Supply
Leave turned on.
Main PC
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
Do not shut down the main PC.
When finished, log off of the main PC.
Troubleshooting the computer:
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
Identify the correct input number for your device connection and select it by pressing the appropriate button
The active selection is backlit with a red light
Input - 1: Blu-Ray / Multi-Region Player
Input - 2: Document Camera
Input - 3: Guest HDMI
Input - 4: Not in use
Input - 5: Guest VGA
Input - 6: Not in use
Input - 7: Not in use
Input - 8: Main PC
Room Audio
Note: Make all audio adjustments on the main PC.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
No controls available.
Blu-Ray Player
Document Camera
Projector
To turn on: Press the power button once. Wait for the projection to load. Might take a minute.
To turn off: Press the power button, watch for the text that will show up in the projection. Press the power button again to fully turn it off.
Freeze: This button will “freeze” the projection. The display will stay the same regardless of what you do in the computer. Press the button again to “unfreeze” and the projection will go on as usual.