WAC 213

Open

WAC 213

Open

Lectern

Power Supply

To use any equipment in the space, the power supply must be turned on.

Mac Mini

• If you find the Mac Mini turned off, press the power button once.

• When the Mac Mini is on, the light illuminates WHITE, as shown above.

Do not shut down the Mac Mini.

Mac Mini Password

To continue past the password screen, simply press ‘Enter’ on the keyboard. There is no password.

USB Plug-in

On the lectern, you will find a USB extender cable. Utilize this for any slide advancers, USB sticks, or other equipment you need to plug in to the computer.

Troubleshooting the computer

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Video Switcher

The video switcher helps select between multiple incoming video sources.

• For projection make sure the power is turned on for the switcher. The green switch located on the left should have the “I” pressed in for it to be turned on. If the “O” is pressed in, the video switcher is turned off.

• Identify the correct input number for your device connection and select it by pressing the appropriate button.

• The active selection is backlit with a red light.

#1 - Not in use

#2 - Not in use

#3 - Not in use

#4 - Not in use

#5 - Guest VGA

#6 - Not in use

#7 - Main PC

#8 - Guest HDMI

Room Audio

Speakers

You can adjust the audio volume from the speakers in the room by turning the speaker volume knob.

Guest Audio

There is a 3.5mm audio cable laying on the lectern to plug into the headphone jack of your device. This is used for all guest devices.

Main PC

Make all audio adjustments on the main PC first.

Note: Each Mac has different icons to find volume button. Here is an example:

• Click on the icon (outlined in red)

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

• The computer volume is muted if you see the speaker icon with an cross on it (outlined in red).

  • To unmute the computer, click the speaker icon.

Note: Maximize the computer volume before proceeding to the next step.

Projector

Point the remote at the front of the projector.

Turning on the projector: Press “On” once (outlined in red).

Turning off the projector: Press “Off” twice (outlined in green).

Projector Screen

Back to top