SMC E016 - Stellyes Lab

Room View

Familiarize yourself with the AV Equipment

AV Equipment

Power Supply

Main PC

When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once. 

Do not shut down the main PC.

When finished, log off of the main PC.

Troubleshooting the computer

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Video Switcher

The video switcher helps select between multiple incoming video sources.

  • For projection make sure the power is turned on for the switcher. The green switch located on the left should have the “I” pressed in for it to be turned on. If the “O” is pressed in, the video switcher is turned off.

  • Identify the correct input number for your device connection and select it by pressing the appropriate button.

  • The active selection is backlit with a red light.

Make the correct selection:

#1 - DVD / VHS Player

#2 - Not in use

#3 - Not in use

#4 - Not in use

#5 - Document Camera

#6 - Guest VGA

#7 - Main PC

#8 - Guest HDMI

Room Audio

Note: Make all audio adjustments on the main PC first.

  • Click the speaker icon (outlined in red).

  • Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

  • The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

    • To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Amplifier

Power button turns the amplifier off and on (outlined in red). Turn it on for any audio needs.

The master volume knob and can control all audio output from all sources (outlined in green).

Sony DVD / VHS

Press the power button (highlighted in red) to turn on the Sony DVD/VHS player.

Be sure the switch (highlighted in gold) is set to DVD/Video (to the right).

Press the eject button (highlighted in green).

Insert DVD/VHS and hit play.

 

Document Camera

Projector

Point the remote at the front of the projector.

Turning on the projector: Press “On” once (outlined in red).

Turning off the projector: Press “Off” twice (outlined in green).

Projector Screen

The projector screen is manual and there is a string at the bottom center.

To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.

To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.

Back to top

For assistance with an issue, please contact the Knox College ITS Help Desk.
Log into MyKnox and search this link: https://my.knox.edu/ICS/Help_Desk/