GDH 303

Open

GDH - 303

Familiarize yourself with the AV equipment

Open

AV Cabinet

Power Supply

Main PC

When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once. 

Do not shut down the main pc.

When finished, log off of the main pc.

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Video Switcher

The video switcher helps select between multiple incoming video sources.

• Identify the correct input number for your device connection and select it by pressing the appropriate button.

• The active selection is backlit with a red light.

#1 - Main PC

#2 - Not in use

#3 - Guest HDMI

#4 - Not in use

#5 - Not in use

#6 - Guest VGA

#7 - DVD/VCR Player

Room Audio

Note: Make all audio adjustments on the main PC.

• Click the speaker icon (outlined in red).

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

• To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Amplifier

Red circle is the power button, it has a light which indicates when the power is on / off

Green circle is the master volume, audio adjustments for any type of platform can be made there

Blu-Ray

Document Camera

Projector

Point the remote at the front of the projector.

Turning on the projector: Press “On” once (outlined in red).

Turning off the projector: Press “Off” twice (outlined in green).

Projector Screen

To lower the projector screen: Press on the bottom of the switch and hold.

To raise the projector screen: Press on the top of the switch and hold.

Do not attempt to raise or lower the screen manually.

The button control panel can be found to the left of the projector screen when facing it.

When the screen is fully extended, it will touch the chalkboard shelf.

Kaptivo

To connect

1. Type 10.72.5.142 (this room’s Kaptivo IP address) into a web browser search bar.

2. Press the button to connect the Kaptivo to the computer.

3. Enter your name when prompted.

4. Use the whiteboard.

5. Save your whiteboards on the computer.

6. Send the whiteboards to yourself for upload to your course/students.

Back to top