GDH 304

GDH 304

Familiarize yourself with the AV equipment

AV Equipment

Power Supply

Main PC

When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once. 

Do not shut down the main pc.

When finished, log off of the main pc.

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Video Switcher

The video switcher helps select between multiple incoming video sources.

  • Identify the correct input number for your device connection and select it by pressing the appropriate button.

  • The active selection is backlit with a red light.

#1 - Main PC

#2 - Document Camera

#3 - Guest HDMI

#4 - SONY DVD/Blu-Ray/Multi-Region Player

#5 - Guest VGA

#6 - Not in use

#7 - Not in use

#8 - Not in use

Room Audio

Note: Make all audio adjustments on the main PC.

  • Click the speaker icon (outlined in red).

  • Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

  • To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Amplifier

Red highlighted button: This button can power on or power off the amplifier. Turn it on for any audio needs.

Green highlighted button: It is the master volume knob and can control all audio output from all sources.

Bass Knob: Leave in middle.

Treble Knob: Leave in middle.

Module Knob: Leave in middle.

Input Knobs: Only turn on the one that is necessary. In this case, everything is on “Input 1”.

Input 1: Everything

Input 2: Not in use (leave off)

Input 3: Not in use (leave off)

Input 4: Not in use (leave off)

Input 5: Not in use (leave off)

Input 6: Not in use (leave off)

Input 7: Not in use (leave off)

Input 8: Not in use (leave off)

DVD/VHS

The power button is outlined in red.

The disc eject button is outlined in green.

The disc tray is outlined in gold.

  • Region Free Blu-ray Region change instructions:

    • Standard DVD Regions 0-8 (region free-code Free)

      • These are set to automatic - just insert the disc and press play.

To change regions

  • Blu-ray Regions are changed manually with remote.

    • Turn player on and open the tray.

    • Once the tray is completely open and not moving press a button on the remote to select regions.

      • Zone A: Press the YELLOW button on the remote control.

      • Zone B: Press the BLUE button on the remote control.

      • Zone C: Press the RED button on the remote control.

    • You can now put your disc in the tray and then close the tray.

Troubleshooting:

  • If your Disc does not play do the following:

    • Open the tray again and leave the disc in the tray. Once fully open press the color button to select the region. Then close the tray.

    • Firmware updates - Firmware updates can be done via the internet. To update players firmware; go to the home menu, then setup menu, and then go to Software update. You must have the player connected to the internet. Click on Update Via Internet and if there is a new firmware the player will automatically update. DO not turn the player off while it is updating.

Document Camera

Projector

  • To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.

  • To turn off the projector, press the power button twice.

Projector Screen

The projector screen is manual and there is a string at the bottom center.

To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.

To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.

Back to top

For assistance with an issue, please contact the Knox College ITS Help Desk.
Log into MyKnox and search this link: https://my.knox.edu/ICS/Help_Desk/