Old Main 211

Open

OM 211

Familiarize yourself with the technology

Note: The password is blank for this room’s computer.

Open

TV Cart

TV

To turn the TV on press the power button (outlined in red).

To bring up the input menu, press the “source” button (outlined in green).

To switch inputs, use the arrow up and down buttons (outlined in gold).

If the remote is unresponsive, replace the batteries with fresh ones.

To change inputs; press the ‘Input’ button (outlined in green). An input source display will pop-up on the top right corner of the TV where you can select the input using the up or down arrows.

SHARP LC-70LE632U inputs listed:

• Input 1 - DVD/VHS

• Input 5 - Main PC

• Input 6 - Guest HDMI

• The rest of inputs are not in use (as seen in the picture above as not available) 

Mac Mini

The Mac Mini is located on the back left side of the TV as pictured below.

• If you find the PC turned off, press the power button once.

• When the Mac Mini is on, the light illuminates WHITE, as shown above.

Do not shut down the Mac Mini.

Mac Mini Password

To continue past the password screen, simply press ‘Enter’ on the keyboard. There is no password.

USB Plug-in

On the back left side of the TV you will see an Anker USB hub. Utilize this for any slide advancers, USB sticks, or other equipment you need to plug in to the computer.

Troubleshooting the computer

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Room Audio

Make all audio adjustments on the main PC first.

Note: Each Mac has different icons to find volume button. Here is an example:

• Click on the icon (outlined in red)

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

• The computer volume is muted if you see the speaker icon with an cross on it (outlined in red).

  • To unmute the computer, click the speaker icon.

Note: Maximize the computer volume before proceeding to the next step.

If there is a need for louder volume, change the output to Sharp HDMI and use the TV remote to turn the volume up or down as needed.

USB Hub

The USB Hub can be used If there is a need to plugin a USB device into the Main PC.

DVD/VHS

To turn on the player, press the power button (outlined in red).

To select between DVD or VHS, press the appropriate button (outlined in green).

To Play, pause, or stop the video, press the appropriate button (outlined in gold).

If the remote is unresponsive, replace the batteries with fresh ones.

Back to top