Old Main 301
- AV Stdt Worker
- Matthew Reed
Familiarize yourself with the room
Power Supply
Leave it turned on.
The green light (outlined below) indicates that the power supply is turned on.
Main PC
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
Jiggle the mouse or press the keyboard to wake the computer.
Sign in to the computer with your username and password.
Do not shut down the main PC.
When finished, log off of the main PC.
Troubleshooting the computer
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
For projection make sure the power is turned on for the switcher. The green switch located on the left should have the “I” pressed in for it to be turned on. If the “O” is pressed in, the video switcher is turned off.
Identify the correct input number for your device connection and select it by pressing the appropriate button.
The active selection is backlit with a red light.
Make the correct selection:
#1 - DVD/VHS
#2 - Not in use
#3 - Not in use
#4 - Not in use
#5 - Main PC
#6 - Guest VGA
#7 - Guest HDMI
#8 - Document Camera
Room Audio
Note: Make all audio adjustments on the main PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Amplifier
Red outlined button: This button can power on or power off the amplifier. Turn it on for any audio needs.
Green outlined button: It is the master volume knob and can control all audio output from all sources.
Bass Knob: Leave in middle.
Treble Knob: Leave in middle.
Module Knob: Leave in middle.
Input Knobs: Only turn on the one that is necessary. In this case, everything is on “Input 1”.
Input 1: All Audio
Input 2: Not in use (leave off)
Input 3: Not in use (leave off)
Input 4: Not in use (leave off)
Input 5: Not in use (leave off)
Input 6: Not in use (leave off)
Input 7: Not in use (leave off)
Input 8: Not in use (leave off)
DVD/VHS Player
To turn on the player, press the power button (outlined in red).
To select between DVD or VHS, press the appropriate button (outlined in green).
To play, pause, or stop the video, press the appropriate button (outlined in gold).
If the remote is unresponsive, replace the batteries with fresh ones.
Document Camera
Projector
To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.
To turn off the projector, press the power button twice.
Projector Screen
The projector screen is manual and there is a string at the bottom center.
To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.
To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.
For assistance with an issue, please contact the Knox College ITS Help Desk.
Log into MyKnox and search this link: https://my.knox.edu/ICS/Help_Desk/