MG 200 Classroom

Open

MGYM 200

Familiarize yourself with the room

Open

AV Cabinet

Power Supply

Leave turned on all the time.

Main PC

When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once. 

Jiggle the mouse or press the keyboard to wake the computer.

Sign in to the computer with your username and password.

Do not shut down the main PC.

When finished, log off of the main PC.

Troubleshooting the computer

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Video Switcher

Make the correct selection:

#1 - VHS/DVD Player

#2 - Not in use

#3 - Not in use

#4 - Not in use

#5 - Guest VGA

#6 - Document Camera

#7 - Main PC

#8 - Guest HDMI

Room Audio

Note: Make all audio adjustments on the main PC first.

• Click the speaker icon (outlined in red).

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

• The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

  • To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Amplifier

Red outlined button: This button can power on or power off the amplifier. Turn it on for any audio needs.

Green outlined button: It is the master volume knob and can control all audio output from all sources.

Bass Knob: Leave in middle.

Treble Knob: Leave in middle.

Module Knob: Leave in middle.

Input Knobs: Only turn on the one that is necessary. In this case, everything is on “Input 1”.

Input 1: All Audio

Input 2: Not in use (leave off)

Input 3: Not in use (leave off)

Input 4: Not in use (leave off)

Input 5: Not in use (leave off)

Input 6: Not in use (leave off)

Input 7: Not in use (leave off)

Input 8: Not in use (leave off)

DVD/VHS

To turn on the player, press the power button (outlined in red).

To select between DVD or VHS, press the appropriate button (outlined in green).

To play, pause, or stop the video, press the appropriate button (outlined in gold).

If the remote is unresponsive, replace the batteries with fresh ones.

Document Camera

Projector

To turn on: Press the power button (outlined in red) once. Wait for the projection to load. Might take a minute.

To turn off: Press the power button twice.

Projector Screen

The projector screen is manual and there is a string at the bottom center.

To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.

To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.

Back to top