Alumni 300 - Evelyn Handlers Forum
- Matthew Reed
- AV Stdt Worker
Familiarize yourself with the AV Equipment
Power Supply
Leave it turned on.
The Power supply comes equipped with a key, twist the key once to the right so it is resting on the ON position.
Main PC
When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once.
Do not shut down the main pc. When finished, log off of the main pc.
If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.
Video Switcher
The video switcher helps select between multiple incoming video sources.
Identify the correct input number for your device connection and select it by pressing the appropriate button.
The active selection is backlit with a red light
#1 - Not in use
#2 - Not in use
#3 - Blu-Ray Player
#4 - Guest HDMI
#5 - Main PC
#6 - Guest Laptop (VGA Connection)
#7 - Not in use
#8 - Not in use
Room Audio
Note: Make all audio adjustments on the PC first.
Click the speaker icon (outlined in red).
Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).
The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).
To unmute the computer, click the speaker icon with the “x” that is outlined in green.
Master Volume Knob
All volume changes should be made on the computer first, then on the “Master” volume control knob.
Amplifier
All volume changes should be made on the “Master” volume control knob shown above.
Power switch: This switch can power on or power off the amplifier. The amplifier is necessary to power the speakers. If the amplifier is turned off, you will have no audio to the room speakers, which in this room, are hanging from the ceiling.
Green circle: Indicates that the amplifier has power when the light is illuminated green.
Note: The knobs highlight in red on the right side of the amplifier are to be set directly in the middle, pointing straight up. If you set them to the far right, you will distort the audio. If you set them to the left, you will have no audio.
Denon DVD / Blu-Ray / Multi-Region
Press the Power button in the top right corner of the remote to turn on the player.
Other functions of the remote are listed here:
Projector
Point the remote at the front of the projector.
Turning on the projector: Press “On” once (outlined in red).
Turning off the projector: Press “Off” twice (outlined in green).
Projector Screen
To lower the projector screen: Press DOWN
To raise the projector screen: Press UP
To stop the screen at one position: Press STOP
Window Shades
For assistance with an issue, please contact the Knox College ITS Help Desk.
Log into MyKnox and search this link: https://my.knox.edu/ICS/Help_Desk/