Alumni 112 - Winning Technology Center

Owned by Matthew Reed
Last updated: Dec, 20, 2023
2 min read

Familiarize yourself with the Room

Alumni 112

Projector Control Panel

  1. The control panel is inside the first closet on the left.

  2. Power Cable for the Crestron outlet needs to be plugged in to power outlet.

  3. Green light on Crestron wall plate needs to be illuminated.

  4. HDMI needs to be plugged in to wall port and laptop.

Control Panel and Wall Ports

Projector

Point the remote at the front of the projector.

Turning on the projector: Press “On” once (outlined in red).

Turning off the projector: Press “Off” twice (outlined in green).

Electric projector screen

To lower the projector screen: Press DOWN

To raise the projector screen: Press UP

To stop the screen at one position: Press STOP

Do not attempt to raise or lower the screen manually.

Screen fully extends.

Room Audio

For audio to come through the room speakers, the amplifier must be turned on. The blue light indicates that it is turned on.

Back to top

For assistance with an issue, please contact the Knox College ITS Help Desk.
Log into MyKnox and search this link: https://my.knox.edu/ICS/Help_Desk/