SMC A203

Open

SMC A203 Classroom

Familiarize yourself with the AV Equipment

Open

AV Equipment

Power Supply

Leave turned on.

Main PC

When the PC is on, the light illuminates WHITE, if you find the PC turned off, press the power button once. 

Do not shut down the main pc.

When finished, log off of the main pc.

If you think the PC is unresponsive, press and hold the power button for a few seconds to force a shut down, wait a few seconds, and then press the power button once to turn it on.

Video Switcher

The video switcher helps select between multiple incoming video sources.

• Identify the correct input number for your device connection and select it by pressing the appropriate button.

• The active selection is backlit with a red light.

Input - 1: Blu-Ray/multi-region player

Input - 2: Document Camera

Input - 3: Guest HDMI

Input - 4: Nothing

Input - 5: Guest VGA

Input - 6: Nothing

Input - 7: Nothing

Input - 8: Main PC

Room Audio

Note: Make all audio adjustments on the main PC.

• Click the speaker icon (outlined in red).

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

• To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Amplifier

No controls available.

Blu-Ray Player

Kaptivo Digital Whiteboard

To connect

1. Type 10.72.5.21 (this room’s Kaptivo IP address) into a web browser search bar.

2. Press the button to connect the Kaptivo to the computer.

3. Enter your name when prompted.

4. Use the whiteboard.

5. Save your whiteboards on the computer.

6. Send the whiteboards to yourself for upload to your course/students.

Document Camera

Projector

To turn on: Press the power button once. Wait for the projection to load. Might take a minute.

To turn off: Press the power button, watch for the text that will show up in the projection. Press the power button again to fully turn it off.

Freeze: This button will “freeze” the projection. The display will stay the same regardless of what you do in the computer. Press the button again to “unfreeze” and the projection will go on as usual.

Projector Screen

The projector screen is manual and there is a string at the bottom center.

To raise the screen, pull the screen by the string out away from the wall a couple of feet, pull down, and release, allowing the screen to retract.

To lower the screen, pull down on the string and let go for full extension.

Back to top