SMC B118 - Herbert V. Neal Laboratory

Open

SMC B118 Classroom

Room audio

Note: Make all audio adjustments on the PC first.

• Click the speaker icon (outlined in red).

• Drag the slider on the bar left to turn down and right to turn up the volume (outlined in green).

Open

Computer Volume

• The computer volume is muted if you see the speaker icon with an “x” next to it (outlined in red/green).

  • To unmute the computer, click the speaker icon with the “x” that is outlined in green.

Projector

• To turn on the projector, press the power button (outlined in red) once while pointing the remote at the front of the projector.

• To turn off the projector, press the power button twice.

Projecting

Plug the projector into the power strip on the projector cart along with your laptop. Plug the cart’s power cable into an available power outlet.

There an HDMI cable attached to the back of the projector, by plugging the other end into your computer; you will be able to display the content from your laptop on the projector screen.

Projector screen

The projector screen is manual and there is a string at the bottom center.

To raise the screen, pull the screen by the string out away from the chalkboard a couple of feet, pull down, and release, allowing the screen to retract.

To lower the screen, pull down on the string and let go near the chalkboard shelf for full extension.

Back to top